ZM80D-HP
www.zalman.co.kr www.zalmanusa.com
6
Good (O)
Good (O)
Bad (X)
Good (O)
VGA
RAM
VGA
Chipset
Front
Back
Thermal Tape
Film
Frontside RAM
Heatsink
Backside RAM
Heatsink
VGA RAM Heatsinks
Compare your computer case with the cases in the diagram for compatibility. The ZM80D-HP cannot be used in systems in which
the VGA Chipset faces upwards. Such cases should not be flipped up-side-down to “correct” this incompatibility.
6. Installation
6.1 Verifying the Computer Case’s Compatibility
1) Peel off the Film from the Thermal Tape on the bottom of the
RAM Heatsinks.
2) Stick the RAM Heatsinks onto the VGA RAMs. There are two
types of RAM Heatsinks - Frontside and Backside. Identify the
proper heatsink and attach appropriately.
3) Press the RAM Heatsinks firmly with your finger for proper adhesion.
(RAM Heatsinks can easily be detached. Please handle with care.)
4) If there are more than 8 RAMs on your VGA card, purchase
additional RAM Heatsinks.
6.2 Attaching VGA RAM Heatsinks
Note 1) Avoid getting grease or any kind of stain on the surface
of the Thermal Tape. The Thermal Tape may not stick.
Clean the surface of the RAM with acetone or alcohol
before attaching.
Note 2)Thermal Tape loses adhesiveness after it has been
used once. Try to attach properly on the first attempt.
Note 3)Thermal Tape cannot be reused after it has been
detached from a surface. If you need more, purchase it
separately.