2 |
P a g e
1.4.
Device Schematics
2
Safety Precautions
All users of the Back Pressure Regulator BPR-1000 device must read the safety precautions section
of this manual before attempting to operate the unit. If this equipment is used in a manner not
specified by the manufacturer, the protection provided by the equipment may be impaired.
Device Not for Medical Use.
DO NOT OPERATE the device IF any of the following conditions exist:
•
The device has not been installed properly.
•
The device is partially dismantled.
•
Service has been attempted by unauthorized or unqualified personnel.
•
The device is not correctly assembled or leaks.
•
The system pressure is above 2MPa.
•
The system temperature is above 130 °C.
3
Setup & Operation
The BPR-1000 has four ports: an inlet port, an outlet port, and two charging ports to set the
pressure. Please note the directionality of the inlet and outlet ports denoted by the arrow on the
side of the device.
Inlet
Figure 1: BPR-1000 Schematic
Outlet
Charging port with valve
Charging gas port
Directionality
Figure 2: BPR-1000 Setup
