The control arm should be at 90
degrees to the servo in the hands off
neutral position. Remove the control
arm and replace it to realign to 90
degrees.
Always turn the transmitter switch to
the on position before plugging in
the airplane battery. Check the
battery condition indicator on the
transmitter to make sure that the
battery is charged.
Plug the ESC into a charged battery.
The male and female JST connectors
have a polarity lock. They will only
mate in one position: RRRRRed to red
ed to red
ed to red
ed to red
ed to red
and black to black
and black to black
and black to black
and black to black
and black to black.The servos
should now move when the transmit-
ter stick is moved. Do not plug the
motor in at this time.
When the stick is pulled back (the
opposite direction to antenna) the
servo control arms should move
forward. When the stick is moved to
the right, the right servo control arm
should move forward and the left
servo control arm moves back.
4