3
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC • Zafferano srl, Viale dell’Industria, 26 - 31055 Quinto di Treviso - TV - Italia
For more information and updates visit our website • www.zafferanoitalia.com
Rechargeable table lamp
INCLUDED
LD0340RA
Multi-socket USB
charger (8xUSB)
LD0350RP
Multi-contact
charging base (max. 6 pc)
BAT04701906701900
Replacement battery pack
LD1010B3
white
LD1010N3
black
LED DIMMER
2,2W • 185lm
2700K
•
IP54
CRI>80 • 5Vdc max 1A
Ø 10 x h 35 cm
Ø 3,93 x h 13,78 in
swap
NOT INCLUDED
Single contact charging
base
Ø 10 cm
Ø 3,93 in
35
cm
13,
78
in
x 2 pz
1. Tips for use:
This product is exclusively for lighting purposes and:
A) It must not be exposed to heavy mechanical loads or contamination; B) It can be installed and used only after checking the state of the pro-
duct; check that is not dirty and has not been damaged during storage; C) Installation and maintenance must be carried out when the appliance
is switched off; D) Any alterations to the product, any tampering and any failure to comply with the instructions provided may make the appliance
hazardous; E) Products with IP54 protection are suitable for outdoor use; F) All metal and plastic surfaces should be cleaned with a soft dry cloth;
G) The company Zafferano shall not be held liable for any damage caused due to its products being assembled in any manner that does not com-
ply with the instructions provided.
2. Technical data of the lamp:
- Power: 2,2 W
- Volt: DC 5 V
- Lumen lamp: 185 lm
- Lithium battery pack included (see section accessories included); for instructions about how to replace the battery pack, please consult the
website: www.zafferanoitalia.com. Use only original batteries for replacement.
- Charge: 6-8 h
- Battery life: 13 h
- Class: III
- Protection rating: IP54
- CRI>80
3. Battery charger technical data:
- Contact charging base: INPUT/OUTPUT 5Vdc - 1A; cavo USB 1.2 Mt.
- Charger: INPUT AC100-240V 50/60Hz; OUTPUT 5Vdc- 1A.
- The lamp works correctly even when connected to the charging base.
- It is advisable to use the original charger and charging base. Alternatively, you can use a certified 1A charger
4. Important:
- The support surface for the lamp must not exceed a 15° tilt or it will fall.
- The battery has an overload protection function.
- To preserve the integrity of the battery, we recommend keeping the charge between minimum 20% and maximum 80%; if the lamp is not used for
long periods, it is advisable to regularly charge/discharge the product.
- Please refer to local laws for the proper disposal and recycling of the battery.
