Cleaning can only be made while cool! Remove the ash depositions from
the exhaust tubes and bends. Please take into account that your fireplace
is checked periodically in terms of functionality by a specialist. Impurities
on the glass are removed most easily and best in terms of environmental
protection with usual glass cleaning means used in the household.
The chimney must also be regularly cleaned by a sweeper. The sweeper
shall inform you about cleaning times. The flue gas exhaust tubes shall be
cleaned through an opening indented for cleaning, if existing.
If a recovery unit placed on the floor is used, this can be cleaned through
the manhole provided by the fitter. To clean the heat recovery unit when it
continues the furnace, the tubes and the actual chimney stack, the use of
fireplace cleaning tablets or powder is recommended.
The glass is cleaned from smoke with a special fireplace glass cleaning
solution. All can be purchased via Zaconex.
The fireplace is covered externally with paint resistant to high temperatures.
Once this paint sets (after 2-3 firings) outer cleaning can be made with a
slightly wet cloth. The door handle and buttons for primary and secondary
air shutters are made of chrome. These are polished with proper means.
WARNING!
Please pay attention during the operation of the fireplace
to keep children away, because its surface is also hot.
BURN DANGER!!!
6.
ENVIRONMENTAL PROTECTION
If the fireplace replaces an older one, the old one will be delivered to the
specialized disposal units for environmental protection and recovery of
major raw materials.
The package of the new equipment is recyclable and will be delivered to
specific units to contribute to environmental protection.
In order to have the emissions of flue gas fall within the limits admitted by
the national and European regulations, only fuels recommended by the
manufacturer shall be used.
Each fireplace user must contribute to environmental protection. In order
to protect the environment when the fireplace is used, we recommend the
following measures:
• only fuels indicated for this equipment shall be used
• fuels shall be stored according to the prescriptions of these instructions;
• start-up instructions shall be observed;
• the fuels used must be well dried;
• the fireplace shall not burn in smoking fire, but in flames;
• do not overheat the fireplace and never load it with a quantity of fuel
higher than the one indicated by the manufacturer;
• do not use the equipment as an incinerator. The use of fuels with high
concentrations of dust or those impregnated with toxic substances shall
be banned. The use of combustible waste shall be strictly banned.
• close the door during use;
• observe the indications regarding the position of the maneuver bodies of
air regulators.
7.
WARRANTY
The following wear and tear parts are excluded from the warranty:
Windows, glass, fire clay plates, seals and casting grill. These wear and tear
parts can be ordered for a fee from the specialized distributor or even the
manufacturer.
Fire clay plates:
These can be damaged by overheating, respectively, aggressive external
influences. If cracks are formed, they must be replaced only when the
walls of the metal burning room are no longer covered.
Sticla:
This safety glass window resistant to high temperatures cannot be
damaged by the burning temperature.
Windows covered in smoke are the sign of faulty burning (e.g., wrong
burning material, wrong firing pressure / flue gas flow at the chimney
stack, etc.).
13
12
