11
ZABER TECHNOLOGIES INC.
Getting Started Guide
Joystick
Zaber’s joystick can be used to control up to 3 Zaber devices
manually; the joystick’s programmable buttons can also save
commands for ease of use.
The joystick is designed to connect at the start of a daisy-chain,
where it can send instructions to all of the other devices over the
chain. However, these joysticks are not intended to act as
controllers, so each axis will still require an integrated controller
or a stand-alone controller.
Default Key Configuration for X-JOY3
Key
Short Press
Long Press
1
Stop
Home
2
Send alerts* 1, 2
Send alerts* 1, 3, 4
3
Move to saved position
Save position
4
Move to saved position
Save position
5
Move to saved position
Save position
6
Axis 1 low speed
Axis 1 high speed
7
Axis 2 low speed
Axis 2 high speed
8
Axis 3 low speed
Axis 3 high speed
*When
comm.alert
is set to 1.
The X-JOY3 with programmable buttons to control devices manually.
