20
www.zaber.com
Highlight the joystick, and go to this tool. Select any of the buttons in
the bottom left to view or change the button functions. Highlight
the centre button to adjust joystick settings. Additionally, the tool
allows you to save and load joystick configurations.
Visit the online manual at
www.zaber.com/JoystickTab
for complete
information on the tools and features available.
Joystick Start-up Instructions
Connect
The joystick must be connected to a computer to configure it.
Once it is configured, you can operate it with or without a computer
connection. The joystick should be the first device in the
daisy-chain. Once all devices are connected to the chain, send the
renumber
command to all device. The joystick will be device 1, and
the joystick will control devices 2, 3, and 4 (the three devices
daisy-chained after it).
Configure
Zaber Console has a useful tool for configuring the joystick settings
and the button functions. In order to use this tool, press the + button
(shown below) and add the
Joystick
tool.
