Z3Stream-SDI User Instructions
DOC-USR-0117-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
Z3Stream.com
38
(8)
A pop-up window appears to confirm the saving of these settings is complete. Click
OK
.
Note:
The very first time settings are saved may take up to 30 seconds. This is due to some flash initialization
which occurs on the very first configuration save.
(9)
In order for these changes to take effect, the unit must be re-started. Power the unit off then back
on and wait 45-60 seconds for the unit to boot up.
(10)
You can return to the use of DHCP by checking
Use DHCP
in the System Setup tab and saving that
to the preset.
8.4.2
Open the User Interface Using ZFinder
(11)
Run the ZFinder PC Utility on your Windows PC. The ZFinder window appears. ZFinder does a
scan of the network and lists the location of all Z3 systems connected to the network. The
Z3
Stream-SDI
appears with your manually entered IP address.
(12)
Select the
Z3
Stream-SDI
.
(13)
Click
Open Device
to reach the user interface.
8.4.3
Open the User Interface Manually
(14)
You can also access the user interface by manually typing your unit’s static IP address into a web
browser on any computer connected to the same network as the unit.
