Z3 Technology Z3Cam-4K-RPS Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 38

Z3 Technology Z3Cam-4K-RPS Скачать руководство пользователя страница 6

6

CONFIDENTIAL

DOC-USR-0102-01

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

GENERAL DESCRIPTION

1.0

The

Z3Cam-4K-RPS

rapid production starter kit is a compact encoder system leveraging Sony’s FCB-ER8300

4K camera block. The unit is capable of encoding HEVC/H.265 and H.264 video in Ultra-HD and HD
resolutions. The software consists of Linux kernel and application packages to allow users to develop their
own advanced multimedia applications.

The

Z3Cam-4K

IP camera features on-board interfaces including GigE, USB 2.0, RS-232 Serial, Micro SD,

Microphone Input and Composite Out. These features combined with the existing capabilities of the FCB-
ER8300 4K camera block allow for a complete compact HEVC 4K IP streaming solution. The OEM electronics
are also available for purchase as the HE4K-DCK-10.

The

Z3Cam-4K-RPS

software is based on the Linux OS. The kit comes with all of the low-level resources such

as the Linux kernel, u-boot, tool chain and starter file system pre-integrated and configured. The software
bundle also contains tools to allow the development of high-level applications using hardware-accelerated
video processing. Those customers that license the optional source code package can also receive source
code for Z3’s demonstration applications, providing an ideal starting point for custom applications.

Z3 Technology can provide services to customize the software applications to a customer’s specification. For
design services or additional support, please contact Z3 at

www.Z3technology.com

or

[email protected]

Micro SD

RS-232 Serial

Figure 1 Z3Cam-4K Interfaces

Microphone In

USB

GigE

+12V Power

NTSC/PAL Output

«
...
4
5
6
7
8
...
»

Содержание Z3Cam-4K-RPS







































Отзывы:

Нет отзывов