8
CONFIDENTIAL
DOC-USR-0133-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
QUICK START GUIDE
2.1
If You Have Received a System from Z3 with the Software Preloaded
To start working with the encoder, you can go straight to Section Error! Reference source not found.,
“RUNNING THE ENCODER,” on page 10. This section describes how to quickly get a UDP stream running
from the single board encoder. It also describes how to dynamically change the bitrate as well as how to
store configurations or set DHCP.
2.2
If You Already Have a System from Z3 and Need to Update the Firmware
You can update the firmware via the HTTP-base user interface by following the instructions in Section
7.0
*Note:
Actual version numbers for your Z3 product may differ from those pictured in this document.
