Z3 Technology Z3-MVPR-01 Скачать руководство пользователя | Manualshive

Страница: 26 / 34

background image

Z3-MVPR-01 V1.06.07b

_______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

26

Default Gateway

192.168.X.XX (

192.168.0.1

) Can generally leave as “192.168.0.1.”

Disregarded if “Use DHCP” is checked.

Use DHCP

[Checkbox]

On /

Off

On -> Use DHCP to get IP address at boot-
up (see “Using DHCP”).

Stop Encoder
[Button]

-----

Stop current encode session.

Start Encoder
[Button]

-----

Start encode session.

Status

Idle

, Stopped, Running

Current status of the encoder.

Load Factory Default
Settings [Button]

-----

Load the default values installed at the
factory.

Load User Settings
[Button]

-----

Load settings previously saved by the user.

Save User Settings
[Button]

-----

Save current settings to a file.

set name

-----

Set name for the Z3-MVPR-01.

set pass

-----

Assign a password to the Z3-MVPR-01.

UPDATE [Button]

-----

Update firmware.

Note 1: Input resolutions Supported:

1080i (1920x1080), 3/4 1080i (1440x1080), XGA (1280x1024), 720p (1280x720), 4/5 720p
(1024x720), D1 NTSC (720x480), D1 PAL (720x576), 4-CIF (704x576), VGA (640x480) 2-CIF (352x576),
CIF (352x288), SIF (352x240), QVGA (320x240), WQVGA (320x180)

7.1 Decoder Options

Parameter

Options (default in bold)

Notes

Input Interface

Ethernet

Where to get the input stream to decode.

Input Format

RTP

RTSP
MPEG-2 TS
MPEG-2 TS over RTP

The format of the incoming stream. These
mirror the options on the encode side. There
is also an RTSP option. RTSP is used with
sources such as VLC and the TI IP Network
Camera.

RTP/TS IP: Port

x.y.z.w:pppp (

225.1.2.3:8888

)

The IP address and port being streamed to.

Video Codec

H.264

The video format being used in the incoming
stream. Only H.264 is supported in this
release.

«
...
24
25
26
27
28
...
»

Содержание Z3-MVPR-01



































Отзывы:

Нет отзывов

Похожие инструкции для Z3-MVPR-01

Бренд: ifi Страницы: 20

Бренд: Qviart Страницы: 24

Бренд: Teac Страницы: 44

Бренд: Teac Страницы: 59

Бренд: Teac Страницы: 2

Бренд: Teac Страницы: 56

Бренд: Teac Страницы: 12

Бренд: Teac Страницы: 160

Бренд: Teac Страницы: 40

Бренд: Vectra Fitness Страницы: 7

Бренд: GPX Страницы: 8

Бренд: Cyrus Страницы: 25

Бренд: Sencor Страницы: 172

Бренд: E-Bench Страницы: 12

Бренд: iLive Страницы: 24

Бренд: Bush Baby Страницы: 3

Бренд: Advance Paris Страницы: 20

Бренд: Oakcastle Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды