Z3-MVPR-01 V1.06.07b
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
16
5.7 Using DHCP
This release also supports using DHCP to acquire an IP address at boot-up:
(24) Click the “Use DHCP” check box in the Web GUI. Once it is checked, you will see that the
values of Local IP Address, Local Netmask, and Default Gateway will gray out:
(25) Click on “Save User”. Wait for “Saved All to User” message to appear:
(1) Click “Save User”
(2) Wait for “Saved all to User” to appear in status
Figure 16 Saving “Use DHCP”
Figure 15 Using DHCP
(1) Check “use
DHCP”
(2) Values gray out
