Z3-MVP-01 V2.4.5b
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
13
6.0
DECODER OPTIONS
Parameter
Options (default in bold)
Notes
Input Interface
Ethernet
Where to get the input stream to decode.
Input Format
RTP
RTSP
MPEG-2 TS
MPEG-2 TS over RTP
The format of the incoming stream. RTSP is
used in sources such as VLC and the TI IP
Network Camera.
RTP IP: Port
x.y.z.w:pppp (
225.1.2.3:8888
)
The IP address and port that the input stream
is being sent to from the streamer.
Video Codec
H.264
MPEG-2
The video format being used in the incoming
stream.
Audio Codec
AAC
MPEG
PCM
None
The audio codec being used in the incoming
stream. MPEG decodes MP1L2 and MP3.
MVE Flag
Yes
No
Set this flag if the streaming source is an
encoder from Z3’s DM368 family of products.
Output Interface
Component
HDMI
Composite
** Component will work for Component and
HDMI.
Video Frame Rate
50Hz
60Hz
Use to select between NTSC and PAL
monitors, for example.
Local IP Address
192.168.X.XX (
192.168.0.6
)
Sets the IP address of the Z3-MVP-01.
Local Netmask
255.255.X.X (
255.255.0.0
)
Sets the netmask of the Z3-MVP-01.
Default Gateway
192.168.X.XX (
192.168.0.1
)
Can generally leave as “192.168.0.1”
Stop Decoder
[Button]
-----
Stop the current decode session.
Start Decoder
[Button]
-----
Start a decode session.
Status
IDLE
, STOPPED, RUNNING
Current status of the decoder.
Load Factory Default
Settings [Button]
-----
Load settings installed at the factory.
Load User Settings
-----
Load user settings previously saved.
Save User Settings
-----
Save current settings for later use.