Z3-MVP-01 V2.4.5b
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
10
(d) At this point, you should now see the “Internet Protocol (TCP/IP) Properties” window (Figure
8). Click on “Use the following IP address” and set the IP Address to the value you determined
in step 6b (default value = 192.168.0.6). Also make sure the netmask is “255.255.0.0”. Then
click “Ok” to save these values.
(e) If you are using Linux, you can set up an alias network address to match what you need. An
example of a command doing this would be:
# sudo ifconfig eth0:0 192.168.0.6 netmask 255.255.0.0
Figure 8 Windows PC IP Address – Internet Protocol Window
Set to 192.168.0.6 (or whatever
value you decide on that begins with
192.168.x.y and does not equal
192.168.81.68)
Make sure the netmask is
set to “255.255.0.0”