Z3 Technology Z3-MVE-40 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 61

background image

DOC-USR-0068-02

_______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

55

Output Format

RTP

UDP
TSRTP
RTMP
TSFILE
FILE
MPTS

Output format of encoded stream.
RTP requires an SDP file for the receiver or
the use of an RTSP URL.
If UDP is selected, don’t forget to check the
value of TS Rate to make sure it is at least
20% more than the video bitrate.
If TSRTP is selected, TS over RTP is
streamed.  Use “rtp://@:{port}” to view in
VLC.
For more on RTMP, see Section 8.0, “USING
THE MVE-40 TO ENCODE RTMP”, on page 41.
TSFILE will write audio and video to a TS file.
If this is selected, you should type the
path/name of the file in “Dest Address” (for
example:  /media/sda1/example.ts to write
to “example.ts” on a drive connected to
USB1)

FILE will write raw .h264 and raw .aac to 2
separate files.  If this is selected, you should
type the path/name of the H.264 file in
“Dest Address” (for example:
/media/sda1/example.h264).  If audio is
enabled, a companion .aac file is then
created (for example, for “example.h264” a
companion file “example_0.aac” is created).
MPTS specifies that the current channel
should be part of the MPTS stream (see
Section 7.0, “ USING THE Z3-MVE-40 TO
ENCODE 4 CHANNELS INTO ONE DVB-ASI
STREAM”, on page 34 for an example of
usage.

Dest Address
(for all but MPTS)

192.168.x.y

(192.168.0.6)

The IP address that the encoder is streaming
to. For TSFILE and FILE formats, used to
specify the path and filename to write to.

Dest Port

0 – 9999 (

5004

)

The port that the encoder is streaming to.

Aux TS File Enable
(UDP Only)

True

False

For UDP streaming only. If UDP is being
streamed, this allows the same UDP stream
to be saved to a TS file. The name of the file
is specified in “Aux TS File Location.”

Aux TS File Location
(UDP Only)

/tmp/aux1.ts

Appears if “Aux TS File Enable” is set to
“True.” Specifies where to save the TS file.
For example, if a USB drive is connected, the
value “/media/sda1/example.ts” could be
specified.

«
...
53
54
55
56
57
...
»

Содержание Z3-MVE-40






























































Отзывы:

Нет отзывов

Похожие инструкции для Z3-MVE-40

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 2

Бренд: Yamaha Страницы: 32

SOLECTRIA XGI 1500 Series

Бренд: YASKAWA Страницы: 70

U1000 iQpump Drive

Бренд: YASKAWA Страницы: 118

VARISPEED-616G5

Бренд: YASKAWA Страницы: 355

Бренд: Growatt Страницы: 45

Бренд: IBA Страницы: 44

Бренд: Humandata Страницы: 10

Бренд: LEGRAND Страницы: 4

Бренд: Moxa Technologies Страницы: 2

Бренд: PBI Страницы: 31

Бренд: FONESTAR Страницы: 9

Бренд: Goobay Страницы: 8

Бренд: Raymarine Страницы: 42

Бренд: Actox Страницы: 36

Бренд: Digitrax Страницы: 8

Бренд: PNI Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды