_________________________________________________________________________
Z3
Technology, LLC ♦
100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 U.S.A.
♦ +1.402.323.07
V1.04.16
12
6.6 IP SETTINGS
– DECODER
1. Once the decoder has stopped, type in your desired IP settings
2.
Hit “Save User” to save your desired settings
3. Power cycle the Z3-MVPR-01
4.
The new IP settings will now take effect
6.7 DECODER CONFIGURATION OPTIONS
Input Selection
Input Interface
Ethernet, DVB-ASI
Input Format
RTP, MPEG-2 TS
RTP IP: Port
Custom
Decoder Setup
Video Codec
H.264
Audio Codec
AAC, PCM, None
Output Setup
Output Interface
SDI
Video Frame Rate
50Hz, 60Hz
Local IP Setup
Local IP Address
192.168.X.XX
Local Netmask
255.255.0.0
Default Gateway
192.168.0.XX
7.0 STREAMING OPERATION
After connecting your video/audio source and configuring the Z3-MVE-
02 Encoder, hit “Start Encoder” so the
status bel
ow says “Status: Running.” If you are using the serial command instead, type “S” to start streaming.
The way to set up VLC as your stream receiver on your PC differs depending on the format of your output
stream.
If your output format is transport stream, please follow the steps below:
