Z3 Technology Z3-HE4K-R4, Инструкция пользователя

Страница: 29 / 31

DOC-USR-0078-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8 th ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
29
Source HDMI
None
Where to get audio for that subchannel.
Pid 0 – 8191 ( 120 ) If UDP format is selected, the PID to use for
that audio channel.
RTP Port 0 – 9999 (8892 – 8898) If RTP format is selected, the port #
associated with that audio channel.
Output Format RTP
UDP
TSFILE
FILE
MPTS
Output format of encoded stream.
RTP requires an SDP file for the receiver or
an RTSP URL (see Section 6.5, “Streaming
RTP” on page 14 for more details).
If UDP is selected, don’t forget to check the
value of TS Rate to make sure it is in line
with expectation.
TSFILE, FILE, and MPTS are not supported in
this release.
Dest Address 192.168.x.y (192.168.0.6) The IP address that the encoder is streaming
to.
Dest Port 0 – 9999 ( 5004 ) The port that the encoder is streaming to.
Aux TS File Enable
(UDP Only) False
True
For UDP streaming only. If UDP is being
streamed, this allows the same UDP stream
to be saved to a ts file. The name of the
file is specified in “Aux TS File Location.”
Aux TS File Location
(UDP Only) /tmp/aux1.ts Appears if “Aux TS File Enable” is set to
“True.” Specifies where to save the TS file.
For example, if a USB drive is connected,
the value “/media/sda1/encode_4k2k.ts”
could be specified.
Video PID (UDP Only) 0 – 8191 ( 220 ) PID assigned to video in the TS stream.
PCR PID (UDP Only) 0 – 8191 ( 520 ) PID assigned to PCR in the TS stream.
PMT PID (UDP Only) 0 – 8191 (31) PID assigned to PMT in the TS stream.