DOC-USR-0077-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
23
7.2
Set Decoder Mode
(6)
Switch to “Decoder” mode by changing “Operating Mode” in the lower right corner of the GUI:
(7)
Once you do this, the System Setup tab will appear with decode settings. In this tab, select
“serial_menu” as the preset at the bottom left of the GUI:
Figure 26 Changing to Decoder Mode
Change to
“Decoder”
Figure 27 Changing Preset
Change to
“serial_menu”
