DOC-USR-0077-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
12
6.4
Configure the Encoder to Stream to UDP
(14)
Change “Output Format” to “UDP.”
(15)
Change “Dest Address” to the IP address of the PC you are streaming to (for example, a typical
default value is 192.168.0.6).
(16)
Change “Dest Port” to 5004
*
Note:
As shipped the left unit is configured to send to port 5004, the
right unit to 5006
).
(17)
Click “start”.
(18)
After your changes, the “CH1” tab should have the following settings:
Figure 9 Configuring the 4K Encoder to Stream via UDP
(1) Change Output Format
to “UDP”
(2) Change Dest Address to
IP address of PC being
streamed to
(3) Change Dest Port to
5004
