17
CONFIDENTIAL
DOC-USR-0018-09
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
6.6
Using DHCP
This release supports using DHCP to acquire an IP address at boot-up. To use it, complete the following:
(24)
Click the “Use DHCP” check box in the Web GUI. Once it is checked, you will see that the values of
Local IP Address, Local Netmask and Default Gateway will gray out:
(25)
Click on “Save User.” Wait for the “Saved All to User” message to appear.
(1) Check “use
DHCP”
(2) Values gray out
Figure 16 Using DHCP
(1) Click “Load User”
(2) Wait for “Saved all to User” to appear in status
Figure 17 Saving “Use DHCP”
