background image

 

    

CONFIDENTIAL

                      Z3-DM816X-VI-RPS RDK V2.00.04a  

 

___________________________________________________________________________________________ 

Z3 Technology, LLC 

 100 N 8

th

 ST, STE 250 

 Lincoln, NE 68508-1369 USA 

 +1.402.323.0702 

39 

registered ti81xx_vin device                                                     
bio: create slab <bio-0> at 0                                                    
SCSI subsystem initialized                                                       
usbcore: registered new interface driver usbfs                                   
usbcore: registered new interface driver hub                                     
usbcore: registered new device driver usb                                        
USBSS revision 4ea20809                                                          
registerd cppi-dma Intr @ IRQ 17                                                 
Cppi41 Init Done                                                                 
i2c-gpio i2c-gpio.3: using pins 25 (SDA) and 24 (SCL)                            
omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz                                     
omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz                                     
Advanced Linux Sound Architecture Driver Version 1.0.23.                         
Switching to clocksource gp timer                                                
musb-hdrc: version 6.0, host, debug=0                                            
musb-hdrc musb-hdrc.0: dma type: dma-cppi41                                      
MUSB controller-0 revision 4ea20800                                              
musb-hdrc musb-hdrc.0: MUSB HDRC host driver                                     
musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1             
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002                    
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1               
usb usb1: Product: MUSB HDRC host driver                                         
usb usb1: Manufacturer: Linux 2.6.37 musb-hcd                                    
usb usb1: SerialNumber: musb-hdrc.0                                              
hub 1-0:1.0: USB hub found                                                       
hub 1-0:1.0: 1 port detected                                                     
musb-hdrc musb-hdrc.0: USB Host mode controller at d0832000 using DMA, IRQ 18    
musb-hdrc musb-hdrc.1: dma type: dma-cppi41                                      
MUSB controller-1 revision 4ea20800                                              
musb-hdrc musb-hdrc.1: MUSB HDRC host driver                                     
musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2             
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002                    
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1               
usb usb2: Product: MUSB HDRC host driver                                         
usb usb2: Manufacturer: Linux 2.6.37 musb-hcd                                    
usb usb2: SerialNumber: musb-hdrc.1                                              
hub 2-0:1.0: USB hub found                                                       
hub 2-0:1.0: 1 port detected                                                     
musb-hdrc musb-hdrc.1: USB Host mode controller at d0836800 using DMA, IRQ 19    
NET: Registered protocol family 2                                                
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)                   
TCP established hash table entries: 8192 (order: 4, 65536 bytes)                 
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)                        
TCP: Hash tables configured (established 8192 bind 8192)                         

TCP reno registered                                                              
UDP hash table entries: 256 (order: 0, 4096 bytes)                               
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)                          
NET: Registered protocol family 1                                                
RPC: Registered udp transport module.                                            
RPC: Registered tcp transport module.                                            
RPC: Registered tcp NFSv4.1 backchannel transport module.                        
NetWinder Floating Point Emulator V0.97 (double precision)                       
PMU: registered new PMU device of type 0                                         
omap-iommu omap-iommu.0: ducati registered                                       
omap-iommu omap-iommu.1: sys registered                                          

Содержание Z3-DM816X-VI-RPS

















































Отзывы: