CONFIDENTIAL
DOC-USR-0008-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
63
APPENDIX A: Example of a Successful Boot Log
DDR OK
U-Boot 2010.06 (Jun 30 2015 - 15:51:12)
TI8169-GP rev 1.3
ARM clk: 1209MHz
DDR clk: 796MHz
DSS clk: 549MHz
DSP clk: 1008MHz
I2C: ready
DRAM: 1 GiB
NAND: 256 MiB
Net: Detected MACID:84:7e:40:f2:d8:ae
Ethernet PHY: GENERIC (x001cc915) @ 0x01
DaVinci EMAC
Press SPACE to abort autoboot in 0 seconds
Booting from NAND and ubifs...
Set powerlevel to 5
NAND read: device 0 offset 0x280000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 81800000 ...
Image Name: Linux-2.6.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2471140 Bytes = 2.4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.37 (z3@z3pci-dev) (gcc version 4.5.3 20110311 (prerelease) (GCC)
) #1 Tue Jun 30 15:50:55 CDT 2015
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ti8168evm
vram size = 20971520 at 0x0
bootconsole [earlycon0] enabled
ti81xx_reserve: ### Reserved DDR region @8ff00000
reserved size = 20971520 at 0x0
FB: Reserving 20971520 bytes SDRAM for VRAM
no PCI mem!!!!!!!!!!!!!!!!!!!!!
setting z3_edma_mem_size to 10485760
Memory policy: ECC disabled, Data cache writeback
OMAP chip is TI8169 2.0
gpio regs: 3c:00000005 34:fffffff0