CONFIDENTIAL
Z3-DM8107-RPS V1.2.6
15
7.
Installing the Released Materials
The software provided will allow you to re-create the pre-installed software of the DM8107-MOD starting
from the source code included.
1)
On a PC running Linux, create a directory where the released materials are going to be located,
such as /home/z3/z3-dm8107:
# mkdir /home/z3/z3-dm8107
2)
Copy the released tar archive to that directory.
# cp z3-dm8107-RELEASE_NAME.tar.bz2 /home/z3/z3-dm8107
3)
Untar the archive.
# tar -xjf z3-dm8107-RELEASE_NAME.tar.bz2
4)
A directory with the release name and a set of sub-directories should have been created as follows:
z3-dm8107/
a)
build-tools
Contains some scripts that simplify the setup
b)
filesys
This contains the root file system for the DM8107 target
c)
kernels
The kernel source tree, with added support for the Z3-DM8107-MOD HW
d)
images
Binary images needed by the target are here
e)
toolchain
ARM compilers, binutils and other build tools
f)
u-boot
The u-boot source tree, with support for the Z3-DM8107-MOD HW
g)
z3apps
Optional software licensed by Z3 Technology
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 U.S.A. ♦ +1.402.323.0702
