CONFIDENTIAL
DOC-USR-0171-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
34
7.12
Running DHCP
DHCP is also supported. When enabled, the Z3-SBE264-10-RPS dynamically receives an IP address to use
at startup. The IP address that is assigned can be seen through the ZFinder tool running on a PC. To
view how DHCP support works, you can complete the following steps:
(1)
The first thing you need to do is set up a custom configuration so that the DHCP setting is used the
next time the system boots up. To do this, click on the “User Presets” tab and click on “new”:
(2)
This brings up a new text box to enter the preset name. Type “z3_config1” and click “ok”:
Figure 21 The User Presets Tab
(1) Click on “User Presets” Tab
(2) Click on “new”
Figure 22 Entering a User Preset Name
(1) Type “z3_config1”
(2) Click “ok”
