HE4K-DCK-10 User Instructions
DOC-USR-0123-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
33
6.7
Record to USB
The HE4K-DCK-10 supports writing encoded video to a storage device connected to the USB port in .ts
file format.
(1)
Connect a USB flash drive or other USB storage device to
USB
on the back of the camera.
Note:
The USB drive must be formatted in either FAT32, VFAT, EXT3, or EXT4 format.
(2)
Return to the user interface, and if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right corner of the screen
of any tab.
(3)
Verify the
Output Resolution
is set to
Follow Input
to output a 4K stream. If a lower resolution
output is desired, select this in the dropdown menu and resizing will occur.
(4)
Select the
Video Codec
you would like to use for your video encoding.
(5)
Under Output Setup, select
TSFILE
from the
Output Format
dropdown menu.
(6)
Click on the
Output Device
field to select your USB storage location. This will automatically
populate if a USB is detected.
(7)
In the
File Prefix
textbox, enter the desired prefix for your .ts file name.
a.
When saved, a number will be automatically generated and added to the end of the file
prefix, starting with zero. If subsequent recordings are made to the same USB, existing files
with the same prefix will be detected and the new recordings will auto-increment to the
next number.
b.
For example, if the prefix
MOV1_
is provided. This will result in a file entitled
MOV1_0.ts
on the USB. Subsequent recordings will be entitled
MOV1_1.ts
,
MOV1_2.ts
, etc.
c.
The default prefix provided is
MOV1_%F_%T_
which will pull the current date, in
year/month/day format, and time, in 24-hour notation, into the file name.
Connect Storage
to USB 2.0 Port
Figure 30 USB Connection
