FV4K-DCK-1X User Instructions
DOC-USR-0127-07
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
61
8.10.1
Initial Wi-Fi Setup
(1)
Power down the encoder and plug the Wi-Fi adapter into the USB slot on the camera. Then power on
the encoder. The device will boot up and you will see the green indicator LED on the Wi-Fi stick
flashing.
(2)
If there are no saved networks or none of the saved networks are currently available the device will
enter Access Point (AP) mode. In this mode it will create a wireless network from the product name
and ethernet mac address of the unit. The default password for this network is “z3password”. To
connect to this network, connect to the network from your PC.
Figure 70 Display of Network Options
(3)
Once connected you can find the encoder with the ZFinder application. Select the encoder from the
list click “Open Device”. This will bring up the web interface.
Figure 71
Example of encoder showing up on ZFinder application
(4)
On the web interface click the “Wi
-
Fi” tab to set up a network connection
(5)
To select the Wi-
Fi network to connect to, click on the “Available Networks” dropdown. If you don’t
see the network you are looking for click the “Wi
-
Fi” tab again and go back
to the dropdown.
