FSDI-DCK-1X User Instructions
DOC-USR-0131-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
54
8.6
Factory Reset
The FSDI-DCK-1X can be reset to its original factory settings using the pinhole reset on the lower right of the
I/O PCB of the unit.
Figure 59 Pinhole Reset
(1)
Allow the FSDI-DCK-1X to boot completely.
(2)
Press and hold pinhole reset switch until status light flashes yellow
(3)
Power cycle device. Once the boot sequence has completed the FSDI-DCK-1X will return to its
original factory settings.
The HE2K-DCK-1X can also be reset via a USB device at boot:
(1)
Plug a FAT32 formatted USB drive into your PC.
(2)
To do a factory reset create a directory or file named “z3reset”. To only reset the password, create
a directory or file named “z3passreset” instead.
(3)
Eject the drive from your PC and plug into a powered down HE2K-DCK-1X. Power on the encoder.
(4)
When the boot is complete the unit will be running the factory defaults if “z3reset” was used. If
“z3passreset” was used the unit will have the same settings except the password will be disabled.
Figure
58
Password Entry Screen
