Default set to mode 3.
NOTE: Mode 2 will increase activity and affect battery life.
TAMPER SWITCH
Tamper switch is activated whenever sensor’s cover is removed while the device is powered up. It will
send an alarm notification as scheduled.
MOUNTING
WAIT! This sensor may only be used and installed indoors. Outdoor installation will void its warranty.
Find the best spot for your Z-Wave 4-in-1 sensor. Use the 2 screws included in the box to fix the mounting
bracket to flat surface of your choice - at least 7 feet above the ground for best results.
Once the bracket is securely installed, carefully slide the 4-in-1 sensor onto the bracket and position it by
tilting it to either side, upwards, or downwards - just like in the images below.
