COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_BATTERY
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_NOTIFICATION_V4
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SENSOR_MULTILEVEL_V7
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
BEFORE YOU RETURN IT
Let us know if you are having any issues installing or operating the device.
Our fast and friendly tech support is here to help, every day of the year: [email protected]
Go to getzooz.com to get more helpful tips and ideas for your smart home.
WELL DONE!
You have picked the finest solution for your smart home, congrats!
Now it's time to enjoy these great features of your new product:
-
4 smart sensors in 1 compact device
-
7 levels of motion sensitivity to choose from
-
3 modes for motion / temp led indicator notifications
-
Built-in tamper protection
-
Low battery alerts
-
Z-Wave Plus with improved 500 chip for faster and safer wireless communication
-
Security enabled Z-Wave device – requires a security enabled gateway controller for full functionality
INSTALLATION
WAIT!
Include the 4-in-1 sensor to your Z-Wave network before mounting it.
Z-WAVE INCLUSION
1. Install the batteries and bring the 4-in-1 sensor as close to your Z-Wave gateway controller as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Press and release the Z-Wave button TWICE quickly. The sensor will enter secure inclusion mode.
4. A new 4-in-1 sensor should appear on your controller's device list
Q: I have not been able to add the device to my network after several attempts, what do I do now?
A: If you are unable to include the Z-Wave sensor to your controller, please try one of the following:
