Version 0.1
8 June 2011
www.2myhome.eu
3.
External Screen page
Description:
Obtain/Change the current page displayed on external displays using
the Screen Meta Data Command Class.
What is displayed on each of these pages can be configured using the
2MyHome Graphical Web interface.
Size:
1 byte
Writable:
Yes
Default value:
0
Possible values:
0 - 255 (depending on configuration)
class: 0x8C COMMAND_CLASS_GEOGRAPHICAL_LOCATION
The Geographic Location Command Class can be used to set or request the world wide position of the device.
class: 0x9A COMMAND_CLASS_IP_CONFIGURATION
The IP Configuration Command Class can be used to change the network connection settings of the device.
Note that the myGate does not perform any domain name lookups, therefore the DNS settings are ignored.
class: 0x72 COMMAND_CLASS_MANUFACTURER_SPECIFIC
This will report information about the manufacturer. This product will contain the manufacturer ID of
BeNeXt
.
Manufacturer ID of
BeNeXt
is 138, the ID of this product is 1.
class: 0x8F COMMAND_CLASS_MULTI_CMD
The Multi Command Class can be used for sending multiple commands at the same time, increasing Z-Wave
network performance.
class: 0x92 COMMAND_CLASS_SCREEN_MD
The Screen Meta Data command class is used to display the status of the various devices in the network, using
a screen on another Z-Wave device in the network (BeNeXt myDisplay for instance).
class: 0x73 COMMAND_CLASS_POWERLEVEL
The Powerlevel Command Class is used to check the connection quality between two Z–Wave devices.
class: 0x8A COMMAND_CLASS_TIME
The Time Command Class can be used by other device to request the current date and time of the day. Note
that the myGate needs an internet connection to configure its internal clock.
class: 0x86 COMMAND_CLASS_VERSION
The Version Command Class can be used to request the Z-Wave and software version of the device.
