PDQXDOV]ZDYHHXURSHFRPPDNHSKS"ODQJ HQ W\SH VNX =0(B5&
KWWSPDQXDOV]ZDYHHXURSHFRPPDNHSKS"ODQJ HQ W\SH VNX =0(B5&
out a Node Information Frame.
Pressing the "INCL." button for three times will send out a Node Information Frame.
LED Control
Green blinking 1Hz frequency: Learning Mode
Red blink: No program/ invalid button press / The protection is set
Yellow for 3 sec: The On button command was send successfully
Blue for 3 sec: The Off button command was send successfully
Yellow/RED for 3 sec: The On button command was send unsuccessfully
Blue/RED for 3 sec: The Off button command was send unsuccessfully
Red blinking 2Hz frequency: The batterry seems to be low.
Yellow/Blue/Red 3sec: The protection is unlocked
Blinking Blue - we are dimming.
Associations
A
Z-Wave devices control other Z-Wave devices. The relationship between one device controlling
another device is called
association. In order to control a different device, the controlling device needs to
maintain a list of devices that will receive controlling commands. These lists are called association groups and
they are always related to certain events (e.g. button pressed, sensor triggers, ...). In case the event happens all
devices stored in the respective association group will receive a common wireless command.
Association Groups:
1
Lifeline. Send to controller battery level and WakeUp Notification (max. nodes in group: 5)
2
The buttons of group №1 (max. nodes in group: 5)
3
The buttons of group №2 (max. nodes in group: 5)
4
The buttons of group №3 (max. nodes in group: 5)
5
The buttons of group №4 (max. nodes in group: 5)
6
The buttons of group №5 (max. nodes in group: 5)
7
The buttons of group №6 (max. nodes in group: 5)
8
The buttons of group №7 (max. nodes in group: 5)
9
The buttons of scene №1 (max. nodes in group: 5)
10 The buttons of scene №2 (max. nodes in group: 5)
11 The buttons of scene №3 (max. nodes in group: 5)
12 The buttons of All On/Off (max. nodes in group: 5)
