4.2 Device Label and Connection Diagram
4.1 Supply Voltage Input Connection of the Device
Note-1
E
:
xternal fuse is recommended.
Make sure that the power supply voltage is the same
indicated on the instrument.
Switch on the power supply only after that all the electrical
connections have been completed.
Supply voltage range must be determined in order. While
installing the unit, supply voltage range must be controlled
and appropriate supply voltage must be applied to the unit.
There is no power supply switch on the device. So a power
supply switch must be added to the supply voltage input.
Power switch must be two poled for seperating phase and
neutral, On/Off condition of power supply switch is very
important in electrical connection.
External fuse must b e o
n
( +
) connection.
230V
CONNECTION DIAGRAM
6
Power Supply Connection
EXTERNAL
FUSE
(1A )
Note-1
Supply
Switch
Supply Voltage
4
5
L
N
230V
( %15) 50/60Hz ,
115V
( %15) 50/60Hz,
24V
( %15) 50/60Hz ,
±
±
±
10 - 30 V
1.5 W
Must be determined when ordering.
16A @
250V
1HP
230 V
± 15%
50/60Hz - 1.5VA
OUTPUT
NO
NC
C
7
8
P
A
U
S
E
S
T
A
R
T