Z-EDGE X3, Руководство пользователя

Страница: 11 / 20

9
PHOTO CAPTURE MODE
Photo Resolution
Set the Photo Resolution of the X3 Camera inside Settings > Photo Capture > Photo
Resolution.
Timer
Delay the capture of a single photo by up to 20 seconds after pressing the Shutter
button. Self-Timer can be set inside Settings > Photo Capture > Self-Timer.
Auto
Capture photos at set intervals in a continuous loop using Auto-Shoot. Set the interval
timer for capturing photos between 3, 10, 15, 20 and 30 seconds. The first photo will
be captured the selected interval time after pressing the Shutter button in Photo
Capture mode. An audible beep indicates each second passed between photos being
captured. The X3 Camera will continue to take photos until the Shutter button is
pressed again. Auto-Shoot intervals set inside Settings > Photo Capture >
Auto-Shoot.
Burst Mode
The X3 camera will capture several photos in quick succession in burst mode. Set
between 3, 5 and 10 photos taken continuously after pressing the Shutter button in
Photo Capture mode. Burst can be set inside Settings > Photo Capture > Burst Mode.
duration video clips from being lost in a single overwrite. Set video clip durations
between 2,3 or 5 minutes. Video clip duration set inside Settings > Video Recording >
Loop Recording.
Car Mode
The X3 Camera can operate like a car dash camera in Driving Mode. The camera will
automatically power on and begin video recording when connected to power.
Once disconnected from power it will stop recording and automatically shut down
after a period of time. If operating as a car dash camera, Driving Mode is best used
alongside Loop Recording for the most efficient storage of video clips. Feature
enabled/disabled inside Settings > General Settings >Car Mode.