ZPrinter
®
650 Hardware Manual
Post-Processing With Z-Bond
zcentral.zcorp.com
47
All Rights Reserved
10/21/08
4.2 Using the Post-Processing Unit
The Post-Processing Unit provides a convenient way to infiltrate parts without having to move the part to a
separate work area. Follow the steps below to set up the Post-Processing Unit for infiltration.
CAUTION
The Post-Processing Unit is for use with Z-Bond only. Do not use with any other
Infiltrant. Do not use with spray paint of any kind, or with any flammable spray.
Check the Materials section of our Web site for the latest complete information regarding post-processing
materials, techniques, Best Practices, and material storage guidelines:
zcentral.zcorp.com
.
1. Pull down the Accessory Tray Arm.
2. Slide the Accessory Tray onto the Arm
.
3. Place the part on the Accessory Tray.
4. Unlatch the metal tray from inside the top of the Post-Processing Unit.
