Z-Com XG-3120 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 35

Z-Com XG-3120 Скачать руководство пользователя страница 27

26

3-5 Management

Change Password

Here allow you to change the Access Point’s password, do the following:

1.

To change the current password, choose the “Change Password” option from the

“Management” section in the 802.11g SMB Wireless Access Point’s left page. Key in the

default password “default ” in the “Current Password” filed.

2.

Changing password for the Access Point is as easy as typing the password into the New

Password field. Then, type it again into the Retype New Field to confirm. Click the

“Apply” button to save the setting.

Note: After you change password, please take note of your new password. Otherwise, you

will not able to access the 802.11g SMB Wireless Access Point setup. If you forget the

password, you could restore the default password “default” by clicking the “Yes” check box

in the “Restore Default Password” field or pressing the Reset button on the back panel of your

802.11g SMB Wireless Access Point for at least 10 second – and all previous configurations

will need to be input again.

«
...
25
26
27
28
29
...
»

Содержание XG-3120




































Отзывы:

Нет отзывов