13
Ø
Obtain IP Automatically from DHCP Server:
If you would like the Access Point to
obtain the IP address from the DHCP server on your network automatically, click the
check box next to “Obtain IP Automatically from DHCP Server”.
Ø
PPPoE:
If you would like to use PPPoE, you need to enter:
Server Name: Enter the server name of your ISP account.
Username and Password: Enter the username and password of your ISP account.
Ø
PPTP:
If you would like to use PPTP, you need to enter:
Server IP: Input the Server IP address of your ISP account.
Username and Password: Input the username and password that your ISP assigned to you.
Current WAN IP Status:
Pressing the “Refresh” button shows the current WAN IP status on this Wireless Access Point
such as Status, IP Address, IP Subnet Mask as well as Default Gateway.
Note:
If you complete the settings, please click on “Apply” and then “Reboot” for changes to
take effect.