Settings
.)
Note:
For dual band APs, the two radios (2.4GHz and
5GHz) need to be configured separately on the
Web interface. The rest of the configuration
procedures are the same as for 2.4G and 5G
radio.
4.
These are the essential wireless settings
that will enable wireless devices on the
network to associate with the Access Point.
5.
Configure the common RF setting as such
Country/Region
domain and
Channel
.
Click Apply to save the changes.
6.
Go to
RF Configure
>
Security Profile
. Click
one of the profiles #, tick the Enable box
and press Edit.
7.
Clear the
Security Profile Name
and
Wireless Network Name (SSID) box, and
then type a unique name that you desire to
call this wireless network. This will help
users identify this wireless network in their
wireless network connection. Adjust the
maximum connected users if necessary.
8.
In
Network Authentication
, select the
desire authentication method and then
enter the encryption phrase accordingly.
9.
Click Apply to save the changes.
10.
Click Logout to exit the Web interface.
STEP 7: VERIFY THE CONNECTION
1.
To check 3G/4G connection status, go to
LTE
Information
.
2.
Connect the AP to your network.
3.
Use any wireless-enabled computer or
mobile device to search for and select the
wireless network you’ve previously
configured.
4.
If you can connect, open a browser and link
to any public website.
Copyright © 2016 Z-Com, Inc. All rights reserved.
ZWA is trademark of Z-Com, Inc. All other company and product
names mentioned in the documentation are held to be trademarked
(and registered) by the primary holders.
