3.
To check 3G/4G connection status, go to
LTE
Information
.
Configuring for Management by zCloud
Before configuring the LTE-Fi AP to be managed
by zCloud, make sure that AP mode is set to
Fat
AP.
1.
If currently in Thin AP Mode: On the main
menu on the left, click
Advanced Setting
.
Select
Fat AP
from the drop-down list.
Click Apply to take effect.
2.
Go to
Managed By Cloud
>
Cloud
Management
. Click Yes to enable cloud
management and enter zCoud IP or DNS
address provided by the supplier. Click
Apply. If the connection has been made
successfully, the Cloud Connectivity Status
will show:
Connected
.
3.
To check 3G/4G connection status, go to
LTE
Information
.
Configuring for Standalone Operation
Before configuring fat AP Basic settings, make
sure that AP mode is set to
Fat AP.
1.
If currently in Thin AP Mode: On the main
menu on the left, click
Advanced Setting
.
Select
Fat AP
from the drop-down list.
Click Apply to take effect.
2.
On the main menu on the left, click
Basic
Setup
. In the
Basic Setup
page, go to LAN
Port and assign a fixed IP address to the LTE
Fi AP. Click Apply.
3.
Go to
RF Configure
>
Wireless Settings
.
(For dual band 5G setting, select Card 2 first
then go to
RF Configure
>
Wireless
