Z-BEN D700 Series, Руководство пользователя

Страница: 23 / 41

4.3.6 Abnormal
Analysing and inspecting current software and hardware of the device: When some abnormal events happen,the device will make a
Relative answer such as show message and buzzer.
【
Event Type
】
selecting abnormity you want to inspect
【
Enable
】
Select it to make sure abnormal function workable
【
Show message
】
Automatically alarm cue dialog box come out of the main screen
【
Buzzer
】
Device will have two long nosie “di di” while alarm is happening
4.4 System setup
Set the system parameters such as general setup, code setup, network setup, network service, output mode, PTZ control, serial port
setup and alternate patrol setup.
4.4.1 General setup
【
system time
】
Set the system data and time.
【
data format
】
Choose the data format: YMD, MDY, DMY.
【
list separator
】
Choose list separator of the data format.
Picture 4.12 regular setu Picture 4.13 summer time (week) setup Picture 4.14 summer time (data) setup
【
time format
】
Choose time format: 24-hour or 12-hour.
【
language
】
English or Chinese.
【
hard disk full
】
Choose stop: Stop recording when the hard disk is full.
Choose cover: Cover the earliest recording files and continue recording when the hard disk is full.
【
number
】
Only when the address button in the remote controller and the corresponding DVR number is matched, the remote
operation is valid.
【
video format
】
PAL or NTSC.
【
Latency time
】
Set the latency time in 0-60. 0 means no latency time.
【
summer time
】
Choose the summer time option and pop the dialog box as followed.
Network Hard Disk Videocorder Fast Operation manual
22