Z-BEN D700 Series, Руководство пользователя

Страница: 13 / 41

You can use desktop shortcut menu or click [main menu]> [alarm function]> [alarm output] to enter the alarm output interface.
【
configuration
】
Alarm is on according to the configuration.
【
Manual
】
Click the all button and the according channel is alarming no matter the channel in any state.
【
stop
】
Click the stop button and the according channel stops alarming no matter the channel in any state.
3.5.5 PTZ control
Operation interface is as followed. The functions include: PTZ direction control, step, zoom, focus, iris, setup operation, patrolBetween spots, trail
patrol, boundary scan, assistant switch, light switch, level rotation and so on.
Note 1. Decoder A(B)line connects with DVR A(B)line. The connection is right.
2. Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
【
step
】
Set the PTZ rotation range. Default range: 1 ~ 8.
【
Zoom
】
Click / button to adjust the zoom multiple of the camera.
【
focus
】
Click / button to adjust the focus of the camera .
【
Iris
】
Click / button to adjust the iris of the camera. Picture3.10 PTZ setup-
【
direction control
】
Control the PTZ rotation. 8 directions control is supportive.(4 directions in Front panel is supportive )
【
high speed PTZ
】
Full-screen show channel image. Left press mouse and control PTZ to rotate orientation. Left press mouse and
then rotate the mouse to adjust the zoom multiple of the camera.
【
setup
】
Enter the function operation menu.
【
window switch
】
Switch between different windows.
Special functions
：
1
、
Preset
Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position
1
）
Preset option
Set a location for the preset, procedure is as follows:
Step1: in
Picture 3.10, click the Direction button will turn into preset position , click the Settings button to enter Picture 3.11.
Step 2: click the Preset button , then write the preset points in the input blank,
Step 3: click Settings button, return the Picture 3.10 Complete setup, that is the preset points and preset position corresponds.
Clear Preset
：
Input preset points, click Remove button, remove the preset
2
）
Preset Point Calls
In Picture 3.10, click Page Shift button, enter PTZ control interface as shown in Picture 3.12. In the input blank, write the preset
points, then click Preset button, PTZ turn to the corresponding preset point.
Picture
3.11 Preset Settings
Picture
3.12 PTZ Control
Network Hard Disk Videocorder Fast Operation manual
12