Fig. 3-1: Pressurization delay setting
Fig. 3-2：Pressurization delay setting
This function makes the therapy more comfortable. The Ramp refers to the time duration required by
the pressure to increase from the initial to the minimum gradually or the time duration of the therapy
pressure. The Ramp range is 0~45min, with an increment of 5min.
How to adjust the Ramp:
● Place the cursor on Ramp and press the knob to enter the setting interface.
● Turn the knob to select the pressurization delay.
● Press the knob again to save the settings and return to the standby interface.
There are 0-3 FPS levels; Level 0 is to turn off the function, Level 1 is the lowest level and Level 3 the
highest. This function can help users to quickly adapt to the therapy of the PAP device.
Fig. 4-1 Humidity setting
Fig. 4-2: Humidity setting
3. Humidity level
The heated humidifier is used to heat and humidify the ambient air, making the therapy more
comfortable. During the therapy, if the user feels thirsty, the heated humidifying function can be turned
on. Reduce the Humidity level if the water vapor is felt inside the mask. There are 0-6 Humidity levels
with Level 0 for turn off, Level 1 for the lowest level and Level 6 for the highest level. Levels 1-6 are
equivalent to the following temperatures (with the accuracy of ±4℃) respectively. (Note: These
temperatures are measured without the humidifier tank working):
Place the cursor on the Humidity option, press the knob to enter into the setting interface.
Turn the knob to select the Humidity level, press the knob to save the settings and return to the stand
by interface.
Press and turn the knob to adjust the Humidity level, and press the knob again to save the settings
during the therapy.
06
07
Level 1 = about 33℃,
Level 2 = about 35℃,
Level 3 = about 40℃,
Level 4= about 45℃,
Level 5 = about 50℃,
Level 6 = about 55℃
Humidifier light:
Turn on the humidifier light in order to see the remaining water quantity in the
humidifying tank clearly.
Audible alarm:
When this function is turned on, an audio alarm will be sent incase of an air leak or
motor failure occurred.
Smart start/stop:
With this function turned on, the PAP will start automatically when you put on the
nose mask; and stop within 1 min after you remove the mask.
Time settings:
Adjust the time (minute, hour, day, month, year) displayed on the device.
Alarm clock:
Turn on this function and adjust the alarm time. (
hour, minute
)
Language:
English or Chinese can be selected.
5. Other functions
2. RAMP
How to adjust the Humidity level:
4. FPS level
