15
Installing YUJIN LiDAR
4.5 Connecting the Cables
YRL3V2’s two integrated cables are 27 cm long and can be used by connecting them with the power cable (1
m) and Ethernet cable (1 m) provided with the product. If you need to extend the cable, please contact our
Technical Support.
Integrated
Ethernet cable,
27cm
Integrated power
cable, 27cm
4.5.1 Connecting the Power Cable and Ethernet Cable
1. Connect the power cable to the integrated power cable connector of the LiDAR.
2. Connect the Ethernet cable to the integrated Ethernet cable connector of the LiDAR.
3. You can check the power status of the LiDAR from the front LED indicator. Check if the LED indicator
has turned green (powered ON).
•
Green: Powered ON
•
No light: Powered OFF
Caution
When connecting
the cable
by processing the power cable wire, check the cable information
to connect it correctly. Please refer to
