YTL YTL-002-353, Инструкция по эксплуатации и сборке

Страница: 11 / 19

- 11 -
WARNING! Always dump hopper bag after each use. Damp or wet grass and leaves will
cause damage to hopper if stored for an extended period of time.
WARNING! DO NOT dump or unload the sweeper too close to fire as the brushes and the
hopper bag can be destroyed by excessive heat of flame.
Maintenance
General
• After each use, dump and clean the hopper.
• Rinse/dry inside and outside of the sweeper after each use.
• Periodically check all nuts, bolts, and screws for proper tightness.
• Annually clean out and lightly lubricate parts.
• Use a glossy enamel spray paint to touch up scratched or worn painted metal surface.
• Never exceed the hopper load capacity rating of 52.3 gal (198 l) It will damage the hopper bag.
Lubrication
The bearings in the sweeper have been pre-lubricated at the factory. However it’s recommended that
a few drops of light oil should be added to the brush shaft bearings twice a year. Also, the gear should
be cleaned every two years. After cleaning apply an even coat of light grease.
1. Use a screw driver to pop off the hub cap (Fig. 9).
2. To remove the wheel, take out the circlip and the flat washer; you will see the gear and the
shaft (Fig. 10).