6
STEP 6:
1.
Attach the two upper braces on each side of the support rod using hex bolt M6x45 and nylon lock
nut M6. Loosely tighten.
2.
Connect other end of the braces to the upper mounting tube using bolt M6x45
and nylon lock nut M6.
3.
Tighten all hardware.
STEP 7:
1.
Align all the six holes around inside of hopper and frame and attach using bolts M6x50, big flat
washer Ø 6 on the top and secure with nylon lock nuts M6 on the bottom. Adjust parts the so the impeller
moves freely and tighten the hardware holding the hopper.
2.
Insert the R pin Ø3x75 into the hole on the
swivel axle.