4
STEP 2:
On the other side of the wheel axle repeat the same step as above. Rotate the wheel so both the
wheel and axle holes align and insert the drive pin Ø6x45 and lock it. (Attach the Wheel Assembly Frame on
each side of the Gear Box Axle and Fixing Connecting Rod),
STEP 3:
Insert the hex bolt M6x50 after aligning the hole on the flat end of hitch tongue (stay on top) with the
one at the middle of crossover tube. Connect using a big flat washer Ø6 and nylon lock nut M6 and don’t screw
it up moderately. Install one end of the connecting plate on the wheel frame using bolt M6x35 and lock nut
M6.
