6
7
BacKlIght
Once the instrument is powered on, pressing the power/backlight key
will turn on the display backlight. The backlight will remain on until
the key is pressed again or after two minutes of not pressing any key
on the keypad.
powerIng off
To turn the instrument off, press and hold the power/backlight key
for three seconds.
navIgatIon
The up and down arrow keys allow you to navigate through the
functions of the Pro10.
NAVIGATING THE RUN SCREEN
When in the Run screen, the up and down arrow keys will move the
highlighted box along the bottom options. Once a box is highlighted,
press enter to access the highlighted option.
Description of Run screen box functions from left to right:
Option
Description
SAVE
Highlight and press enter to save displayed
data to memory.
DATA
Highlight and press enter to view and/or erase
saved data.
NAVIGATING THE SYSTEM SETUP MENU
When in the System Setup menu, the up and down arrow keys will
move the highlighted bar up and down the system setup options. See
the System Setup menu section of this manual for more information
about these options.
fIrst power on
The instrument will step through an initial configuration when powered
on for the first time to select the language. Use the up or down arrow
keys to highlight the appropriate language, then press enter to confirm
(figure 6). The language can be changed again in the System Setup
menu.
Figure 6, Select language.
After selecting a language, sensor and membrane, the Run screen will
be displayed. The next time the instrument is powered up, the Run
screen will display immediately after the splash screen. If the sensor
type or membrane type is changed, ensure it is updated in the System
Setup menu.
S Y S T E M S E T U P M E N U
Press the menu
key to access the System Setup menu, figure 7. Use
the up and down arrow keys to scroll through setup options.
EXITING THE SYSTEM SETUP MENU
To exit the System Setup menu, press the down arrow key until the ESC
- Exit box is highlighted, then press enter to return to the Run screen.
