IDS WA System
Commissioning
ba76199e03
08/2018
11
3.5.1 Removing the IDS WA-S adapter from the plug head of the IDS sensor
3.6 Establishing a wireless connection
3.6.1 The
Sensors
menu
You can administer the sensors for your IDS meter in the
Sensors
menu.
Make sure that the plug connection is completely dry and clean.
1. Open the locking device on the plug head sensor.
2. Align the guidance (1) of the IDS WA-S adapter to the notch (2) in the plug of
the plug head sensor and insert the IDS WA-S adapter into the unlocked plug
of the plug head sensor until is clicks into place.
3. Close the locking device on the plug head sensor.
Make sure that the plug connection is completely dry and clean. If
necessary, clean the plug connection prior to opening.
1. Open the locking device on the plug head sensor.
2. Press together the clips of the IDS WA-S adapter with your thumb and forefin-
ger and pull the IDS WA-S adapter out of the plug.
