26
WARNING:
Be very careful to send the correct NewMasterNumber. If you get it wrong you must
either send this command from the number you entered in error or perform a Factory Reset and
reconfigure YOYOCam from the beginning.
User
The Master can add up to 10 users.
To add a user:
Command:
#06#UserNumber#
Example:
#06#+46702222222#
Response:
+46702222222 USER phone number has been added
Error Responses
UserNumber USER phone
number already exists
UserNumber
has already been set up.
Note that YOYOCam treats the national and international format of
the same number as different and will not issue this error if both
formats are sent.
USER phone number list is
full. Please delete old
numbers first.
YOYOCam already has 10 User numbers set up. Use
#07#
to check
and then delete unwanted number(s) to make space for the new
number(s).
To add several users in one command:
Command:
#06#UserNumber1#UserNumber2#UserNumber3#UserNumber4# ….
Example:
#06#+467024670346704444444#
Response:
+46702222222
+46703333333
+46704444444
USER phone number has been added
Error Responses
as above
To find out which User numbers are set:
Command:
#07#
Response:
MMS message including YOYOCam status and User number(s)
To delete a user:
Command:
#113#UserNumber#
Example:
#113#+46703333333#
Response:
+46703333333 USER phone number has been deleted
To delete several Users in a single command:
Command:
#113# UserNumber1#UserNumber2#UserNumber3#UserNumber4# ….
