Youshiko YC9475, Руководство пользователя

Страница: 25 / 37

25
4.4.2.1 ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds.
2. When the alarm time displays, press [ ALARM ] key again to activate the alarm function. Or
press [ ALARM ] key twice to activate the alarm with ice pre-alarm function.
Alarm off Alarm on Alarm with ice-alert
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30
minutes earlier if the outdoor temperature is below -3°C.
When clock reach the alarm time, alarm sound will start.
Where it can be stopped by following operation:
- Auto-stop after 2 minutes alarming if without any operation and the alarm will activate again in the next day.
-By pressing [ALARM / SNOOZE] key to enter snooze that the alarm will sound again after 5 minutes.
-By pressing and hold [ALARM / SNOOZE] key for 2 seconds to stop the alarm and will activate again in
the next day
-By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the next day.
NOTE:
-The snooze could be used continuously in 24 hours.
-During the snooze, the alarm icon “ ” will keep flashing.
4.4.3 UNIT SETTING
Use the [ UNIT ] key to change the unit of the readings on the console display.
Below is the operation step:
- Press and hold [ UNIT ] key for 2 seconds to enter the unit setting mode.
- Short press [ UNIT ] key to proceed to the next setting step.
- Press [ / FORECAST ] or [ / INDEX ] key to change the value. Press and hold the key
for quick-adjust.
- Press and hold [ UNIT ] key for 2 seconds to exit the unit setting mode at any time.
Setting items table:
Step Mode Setting procedure
1s Temperature unit Press [ / INDEX ] or [ / MODE ] key to select °C or °F
2 Rain unit Press [ / INDEX ] or [ / MODE ] key to select mm or in
3 Wind speed unit Press [ / INDEX ] or [ / MODE ] key to select m/s, km/h, knots
or mph
4 Distance unit Press [ / INDEX ] or [ / MODE ] key to select k/m or mi (miles)
5 Baro pressure
unit
Press [ / INDEX ] or [ / MODE ] key to select hPa, inHg or
mmHg
6 Light intensity Press [ / INDEX ] or [ / MODE ] key to select Klux, Kfc or W/m
2
4.4.4 BACK LIGHT
The main unit back light can be adjust, using the [ HI / LO / AUTO ] sliding switch to select the
appropriate brightness:
-Slide to the [ HI ] position for the brighter back light.
-Slide to the [ LO ] position for the dimmer back light.
-Slide to the [ AUTO ] position for the auto adjust back light that according to environment light level