Initial operation:
Open Weather Station battery compartment cover
Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks] and connect with
power supply
When you insert the batteries, all the icon on the LCD display will briefly light up for 3
seconds, and you will hear a beep tone, and detect indoor temperature & humidity.
The Weather Station will now start to make a connection to the Remote remote
sensor. This operation takes about 3 minutes and is displayed by a flashing reception RF
antenna symbol in the “REMOTE SENSOR” display area on the receiver.
Now Open Wireless Remote Sensor battery compartment cover , and insert
battries in Sensor , Make sure you have ch1 on sensor and Insert 2 x AA batteries
observing polarity [ “+” and “–“ marks]
After receiver has created a connection to the remote sensor, it will then be enters
the Radio control time receive mode.
Reception of the Radio signal:
The clock automatically starts the
MSF
signal search after 7 minutes of any restart or
changing of new fresh batteries. The radio mast icon starts to flash.
During the process, the display screen will automatically turn off to reduce other
interference. After the process (in 7 minutes), the screen will light up again.
At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization
procedure with the
MSF
signal to correct any deviations to the exact time. If this
synchronization attempt is unsuccessful (the radio mast icon disappears from the
display), the system will automatically attempt another synchronization at the next full
one hour. This procedure is repeated automatically up to total 5 times.
To start manual
MSF
signal reception, press and hold down the “
▲
” button for two
seconds. If no signals received within 7 minutes, then the
MSF
signal search stops (the
radio mast icon disappears) and start again at the next full one hour.
During RC reception
，
to stop searching radio signal, press the “
▲
” button once.
F.Y.I.:
A flashing radio mast icon indicates that the
MSF
signal reception has started
A continuously displayed radio mast icon indicates that the
MSF
signal was received
successfully
